Operation Guide
Flying Whale Magnetic Levitation Setup Guide
Follow the instructions carefully to set up your Flying Whale magnetic levitation ornament. Keep the base powered on during use, keep metal objects away, and lower the whale slowly until the magnetic balance point is found.
Instruction Manual
Step-by-Step Instructions
-
Power On the Base
Connect the base to a two-pin power adapter and make sure it is powered on. The base must remain powered on during use.
-
Ensure a Safe Environment
Do not place metal objects within 50 cm of the base. Metal may interfere with the magnetic field, cause the base to heat up, and create a safety hazard.
-
Find the Center of the Whale
Hold the whale by the head and tail. The center point is around the connection between the fin and the body. Align this point with the center of the base.
-
Lower It Slowly
Slowly lower the whale along the center line of the base. When it gets close to the base, you will feel magnetic feedback.
-
Release Your Hands Carefully
Once the whale is stable and levitating, slowly release your hands. If it pulls to the left or right, the center is not aligned correctly. Repeat the process until the balance point is found.