Operation Guide
Panda Magnetic Levitation Setup Guide
Follow the instructions carefully to set up your Panda magnetic levitation ornament. Keep the base powered on during use, keep metal objects away, and lower the panda slowly until the magnetic balance point is found.
Instruction Manual
Step-by-Step Instructions
-
Power On the Base
Connect the base to a two-pin power adapter and make sure it is powered on. The base must remain powered on during use.
-
Ensure a Safe Environment
Do not place metal objects within 50 cm of the base. Metal may interfere with the magnetic field, cause the base to heat up, and create a safety hazard.
-
Align the Panda with the Center
Support the panda from the bottom with both hands and align it with the center of the base. Lower it slowly along the center line.
-
Feel the Magnetic Balance
As the panda gets close to the base, you will feel the magnetic force engage. Keep adjusting gently until the panda becomes stable.
-
Release Your Hands Slowly
Once the panda is stable and levitating, slowly release your hands. If it pulls to the left or right, the center is not aligned correctly. Repeat the process until the balance point is found.