CRAFTSMM Product Guide

Wooden Dragon Automata

Setup, charging, operation and care instructions for your handcrafted wooden dragon.

01

Natural Solid Wood

Natural grain and handcrafted details make every piece unique.

02

Rechargeable Power

Charge for approximately 2 hours before the first use.

03

Touch Control

Tap the brass touch switch to start or stop the movement.

Video Tutorial

Watch Before First Use

Follow the complete setup video before operating the dragon. Make sure every suspension wire is secured and evenly positioned.

  • Place the product on a flat, stable surface.
  • Do not force the dragon or restrict its movement.
  • Complete the full assembly before starting the mechanism.
Step-by-Step

Assembly & Operation

Work slowly and support the wooden parts with your hand while connecting the suspension wires.

  1. Lower the dragon Tap the switch until the dragon's body reaches its lowest position.
  2. Position the screws Turn the retaining screws so that they face backward.
  3. Insert the first wire Push it into the bottom of the wooden block, flush with the hole.
  4. Tighten the screw Secure the wire gently. Do not overtighten the wooden component.
  5. Repeat for all wires Keep each wire even with the bottom of its wooden block.
  6. Complete the other side Repeat the same connection process on the opposite wing.
  7. Install the tail Insert the tail carefully into its matching connection point.
  8. Start the movement Tap the brass touch switch and watch the dragon come to life.
  9. Stop the movement Tap the same switch again whenever you wish to stop.
Nine illustrated assembly and operation steps for the CRAFTSMM Western Dragon Automata
Visual reference for assembly and operation.
Essential Information

Charging, Safety & Care

Proper charging and gentle care will help protect the solid wood and moving mechanism.

Power & Charging

  • Initial charging time: approximately 2 hours.
  • Expected runtime after a full charge: approximately 3–4 hours.
  • Use a computer USB port or a 0.5A low-current charger.
  • The indicator is green while charging and turns off when fully charged.
  • The touch switch is disabled while the product is charging.
  • A small gap around the charging port is normal.
If the product does not power on after charging, try another cable and a compatible low-current charger.

Safety Warnings

  • Do not hold or restrict moving parts while the dragon is operating.
  • Keep the product away from sharp objects and moisture.
  • For ages 14+; minors should use it under adult supervision.
  • Do not disassemble, burn or immerse the built-in lithium battery.
  • Dispose of the battery through an approved recycling facility.
  • Do not drop the product or expose it to heavy impact.

Cleaning & Maintenance

  • Dust gently with a clean, dry cloth.
  • A cool-setting hair dryer may be used for hard-to-reach areas.
  • Do not clean with water, a wet cloth or chemical cleaners.
  • Store in a dry area away from direct heat and prolonged sunlight.

Natural Wood Characteristics

  • Variations in grain, tone and texture are natural.
  • Minor differences between pieces are part of the handcrafted character.
  • Keep the wooden structure dry to reduce the risk of cracking or deformation.
CRAFTSMM Western Dragon material, charging, warning and maintenance instructions
Original product manual reference.
Continue Exploring

Discover More Handcrafted Wooden Automata

Explore the full CRAFTSMM automata collection, or contact our support team if you need help with setup, charging or maintenance.